Lacebark Elm vs Leatherleaf Fern Plant Comparison
Compare these two plants side by side — care needs, key differences, and which is right for your home.
Lacebark Elm
Ulmus parvifolia
The Lacebark Elm (Ulmus parvifolia) is a deciduous or semi-evergreen tree known for its distinctive exfoliating bark, which reveals a mottled pattern of orange, brown, and gray. It typically grows to a height of 40-70 feet with a broad, spreading crown. The leaves are small, glossy green, and finely toothed. While primarily an outdoor tree valued for its ornamental bark and tolerance of urban conditions, it is sometimes grown as a bonsai. Its graceful form and adaptability make it a popular choice for landscaping.
Leatherleaf Fern
Rumohra adiantiformis
Leatherleaf fern is a perennial fern characterized by its leathery, triangular fronds that are deeply divided into smaller leaflets (pinnules). It's primarily an outdoor plant in warmer climates, often found in forests and rocky areas. It is widely cultivated commercially for use in floral arrangements due to its long-lasting foliage. While it can be grown indoors, it requires specific conditions to thrive and often struggles to adapt to typical indoor environments. Its popularity stems from its attractive foliage and durability as a cut flower.
Quick Plant Comparison
| Feature | Lacebark Elm | Leatherleaf Fern |
|---|---|---|
| Light | Full sun to partial shade. Requires at least 6 hours of direct sunlight daily for optimal growth and bark development. | Bright, indirect light. Avoid direct sunlight, which can scorch the fronds. |
| Watering | Once or twice a week during the growing season, less frequently in winter. | Every 7-10 days, depending on environmental conditions |
| Humidity | 30-50% | 60-80% |
| Temperature | 10-30°C | 18-24°C |
| Care Level | Expert | Expert |
| Growth Rate | Moderate | Moderate |
| Max Height | Grown outdoors, 12-21 meters. As a bonsai, significantly smaller, typically under 1 meter. | 30-60 cm indoors (can be larger outdoors) |
| Pet Safety | ❌ Toxic To Pets | ✅ Safe |
| Soil | Well-draining soil; adaptable to various soil types, including clay, loam, and sand. | Well-draining, slightly acidic potting mix rich in organic matter. A mix of peat moss, perlite, and potting soil works well. |
| Beginner Friendly | ❌ No | ❌ No |
| Weekly Maintenance | 2-4 hours weekly for bonsai, including watering, pruning, and fertilizing. Less for established outdoor trees. | 15 minutes weekly |
🔬 Botanical Information — Comparing These Plants
Lacebark Elm
| Scientific Name | Ulmus parvifolia |
|---|---|
| Family | Ulmaceae |
| Native To | Eastern Asia (China, Korea, Japan, Vietnam) |
| Also Known As | Lacebark Elm, Chinese Elm |
| Leaves | The leaves are small, oval-shaped, and finely toothed, with a glossy green color. They are typically 1-2 inches long. |
| Flowers | It rarely flowers indoors. Outdoors, it produces small, inconspicuous greenish flowers in the early spring. |
Leatherleaf Fern
| Scientific Name | Rumohra adiantiformis |
|---|---|
| Family | Dryopteridaceae |
| Native To | Southern Hemisphere: South Africa, Australia, New Zealand, South America |
| Also Known As | Leatherleaf Fern, Leather Fern, Iron Fern |
| Leaves | The leaves (fronds) are triangular in shape and deeply divided into numerous small, leathery leaflets (pinnules). The pinnules are a rich green color and have a slightly glossy texture. The fronds can grow up to 60 cm long and are arranged alternately along the stem. |
| Flowers | Leatherleaf ferns do not flower in the traditional sense. They reproduce via spores, which are located on the underside of the fronds. Flowering is not a consideration for indoor cultivation. |
📏 Size & Growth — Plant Comparison
Lacebark Elm
Leatherleaf Fern
🌱 Propagation — Comparing Plant Growth
Lacebark Elm
Methods: Seed, softwood cuttings, root cuttings
Difficulty: Moderate
Tips: Collect seeds in the fall and stratify them before sowing. Take softwood cuttings in late spring or early summer. Root cuttings can be taken in late winter.
Leatherleaf Fern
Methods: Spores, Rhizome division
Difficulty: Moderate
Tips: Rhizome division is the easier method. Divide the rhizome in spring, ensuring each section has several fronds and roots. Plant in a well-draining potting mix and keep consistently moist.
✨ Benefits & Features — Comparing Plant Value
Lacebark Elm
The Lacebark Elm's most distinctive feature is its exfoliating bark, which creates a beautiful mottled pattern. It is also relatively resistant to Dutch Elm Disease compared to other elm species.
- ✓ Provides shade in outdoor settings.
- ✓ Adds visual interest with its unique bark.
- ✓ Can be trained into artistic bonsai forms.
- ✓ Relatively drought-tolerant once established.
- ✓ Adaptable to various soil types.
- ⚠️ Toxic to pets
Leatherleaf Fern
The leatherleaf fern is known for its durable, leathery fronds that are commonly used in floral arrangements. Its ability to withstand handling and maintain its appearance makes it a popular choice in the floral industry. It's also relatively drought-tolerant once established outdoors, which is unusual for a fern.
- ✓ Adds a lush, green aesthetic to indoor spaces.
- ✓ Provides a calming and natural element to decor.
- ✓ Non-toxic to pets, making it a safe choice for animal lovers.
- ✓ Can be used in floral arrangements.
- ✓ Offers a unique texture and visual interest.
- 🐾 Pet Safe
📅 Maintenance Schedule — Plant Care Comparison
Lacebark Elm
Leatherleaf Fern
🌞 Light Requirements
Lacebark Elm
Full sun to partial shade. Requires at least 6 hours of direct sunlight daily for optimal growth and bark development.
Low light tolerant: ❌ No
Leatherleaf Fern
Bright, indirect light. Avoid direct sunlight, which can scorch the fronds.
Low light tolerant: ❌ No
💧 Watering Needs
Lacebark Elm
Water deeply and regularly, especially during the first few years after planting. Once established, it is relatively drought-tolerant. Overwatering can lead to root rot, so ensure the soil is well-draining. Allow the top inch of soil to dry out before watering again.
Leatherleaf Fern
Water thoroughly when the top inch of soil feels dry. Ensure good drainage to prevent root rot. Overwatering can lead to yellowing fronds and root rot, while underwatering causes the fronds to become dry and brittle.
🌡️ Temperature & Humidity
Lacebark Elm
Temperature: 10-30°C
Humidity: 30-50%
Leatherleaf Fern
Temperature: 18-24°C
Humidity: 60-80%
🤔 Which Plant Is Right For You?
Lacebark Elm
Ulmus parvifoliaExperienced gardeners or bonsai enthusiasts who are willing to provide the specialized care required to maintain this tree in a container.
✅ Choose This Plant If...
- You appreciate unique and ornamental bark textures.
- You are an experienced bonsai enthusiast.
- You have ample outdoor space with full sun.
- You want a relatively drought-tolerant tree once established.
- You are looking for a tree that can tolerate urban conditions.
❌ Skip This Plant If...
- You have limited sunlight indoors.
- You are a beginner gardener.
- You have pets that might ingest the plant.
- You are looking for a low-maintenance indoor plant.
Leatherleaf Fern
Rumohra adiantiformisExperienced plant enthusiasts who can provide the specific environmental conditions required for this fern to thrive indoors.
✅ Choose This Plant If...
- You appreciate the unique texture and appearance of fern foliage.
- You are looking for a long-lasting green for floral arrangements.
- You have a greenhouse or terrarium where you can provide high humidity.
- You enjoy a challenge and are willing to provide specific care.
- You want a plant that is non-toxic to pets.
❌ Skip This Plant If...
- You struggle to maintain high humidity levels in your home.
- You tend to overwater plants.
- You don't have a bright, indirectly lit space.
- You are a beginner plant owner.
🎯 Quick Verdict
⚡ Key Differences Between These Plants
Both plants have similar basic care requirements but differ in appearance and specific needs. Compare plants carefully to find the best fit for your space.
💡 Pro Tips For Comparing These Plants
Lacebark Elm Care Tips
Lacebark Elm is primarily an outdoor tree. Growing it indoors is challenging due to its high light requirements, need for seasonal dormancy, and potential size. It requires specialized care as a bonsai, including regular pruning, wiring, and root trimming. Maintaining proper humidity and temperature can also be difficult indoors.
- Provide adequate sunlight for optimal bark development.
- Water deeply but infrequently, allowing the soil to dry out slightly between waterings.
- Fertilize sparingly to avoid excessive foliage growth.
- Prune regularly to maintain shape and size, especially for bonsai specimens.
- Protect from extreme cold during winter dormancy.
Leatherleaf Fern Care Tips
Leatherleaf fern is challenging to grow indoors due to its high humidity and specific light requirements. It needs consistent moisture, good air circulation, and protection from direct sunlight. Maintaining adequate humidity is crucial for its survival indoors. It is primarily an outdoor plant and requires expert care to thrive as a houseplant.
- Maintain high humidity by using a humidifier or placing the plant on a pebble tray.
- Water thoroughly but allow the soil to dry slightly between waterings.
- Provide bright, indirect light and avoid direct sunlight.
- Fertilize regularly during the growing season with a balanced liquid fertilizer.
- Monitor for pests and treat promptly with insecticidal soap or neem oil.
⚠️ Common Problems & Solutions — Plant Care Comparison
Lacebark Elm
Leatherleaf Fern
❓ Frequently Asked Questions — Comparing These Plants
Lacebark Elm
What are the light requirements for Lacebark Elm?
Lacebark Elms require bright, indirect light to thrive indoors. Insufficient light can lead to leggy growth and reduced leaf density. A location near an east- or west-facing window is ideal. Avoid direct sunlight, especially during the hottest parts of the day, as it can scorch the leaves. If you don’t have access to sufficient natural light, consider using a grow light to supplement. Rotate the tree regularly to ensure even light exposure on all sides, preventing it from leaning towards the light source. Watch for signs of inadequate light, such as yellowing leaves or slow growth, and adjust the tree’s location accordingly. Proper light is essential for the tree’s overall health and vibrant foliage.
How do I care for Lacebark Elm?
Lacebark Elms thrive indoors with bright, indirect light; avoid direct sunlight to prevent leaf scorch. Water thoroughly when the top inch of soil feels dry, ensuring proper drainage to prevent root rot. Maintain moderate humidity levels by misting regularly or using a humidifier. The ideal temperature range is between 60-75°F (15-24°C).
How do I propagate Lacebark Elm?
Lacebark Elms can be propagated through stem cuttings or air layering. For stem cuttings, take a 4-6 inch cutting from a healthy branch in spring or summer. Remove the lower leaves and dip the cut end in rooting hormone. Plant the cutting in a well-draining potting mix and keep it consistently moist. Cover with a plastic bag to maintain humidity. Roots should develop in 6-8 weeks.
Leatherleaf Fern
What are the light requirements for Leatherleaf Fern?
Leatherleaf Ferns require bright, indirect light to thrive. Direct sunlight can scorch their delicate fronds, so avoid placing them in south-facing windows without any shade. An east- or north-facing window is ideal, providing gentle, diffused light. If you don’t have access to natural light, you can supplement with fluorescent grow lights. Position the lights about 12-18 inches above the plant. If the fronds start to turn pale or yellow, it may indicate that the plant is receiving too much light. Conversely, if the growth is slow and the fronds appear dark green, it may not be getting enough light. Rotate the plant regularly to ensure even exposure to light.
How do I care for Leatherleaf Fern?
Leatherleaf Ferns thrive in bright, indirect light. Avoid direct sunlight, which can scorch their delicate fronds. Water regularly, keeping the soil consistently moist but not soggy. Allow the top inch of soil to dry out slightly between waterings. Maintain high humidity levels by misting the plant regularly or placing it on a pebble tray. The ideal temperature range is between 60-75°F (15-24°C). Fertilize monthly during the growing season (spring and summer) with a balanced liquid fertilizer diluted to half strength. Repot every 1-2 years, or when the plant becomes root-bound, using a well-draining potting mix. Prune away any dead or yellowing fronds to encourage new growth. Proper air circulation is also crucial to prevent fungal diseases.
How do I propagate Leatherleaf Fern?
Leatherleaf Ferns can be propagated through division or spores. For division, carefully separate the rhizomes of a mature plant during repotting, ensuring each division has healthy roots and fronds. Plant each division in its own pot with well-draining potting mix. To propagate from spores, collect spores from the underside of mature fronds. Sow the spores on a moist surface of peat moss in a covered container. Maintain high humidity and warmth until small plantlets develop. Transplant the plantlets into individual pots once they are large enough to handle. Propagation from spores is a slow process, but it can be a rewarding experience.
Last updated: May 20, 2026 — Plant care data reviewed and verified by our editorial team.