Arrowwood vs Leatherleaf Fern Plant Comparison
Compare these two plants side by side — care needs, key differences, and which is right for your home.
Arrowwood
Viburnum dentatum
Viburnum dentatum, commonly known as Arrowwood Viburnum, is a deciduous shrub native to eastern North America. It typically grows to a height and spread of 5 to 10 feet. The shrub features coarsely toothed, ovate leaves that turn attractive shades of red and purple in the fall. In late spring to early summer, it produces clusters of creamy white flowers, followed by bluish-black berries that are attractive to birds. Arrowwood is primarily grown for its ornamental value, including its flowers, foliage, and berries, and is often used in hedges, borders, and naturalized areas. It is not suitable as an indoor plant.
Leatherleaf Fern
Rumohra adiantiformis
Leatherleaf fern is a perennial fern characterized by its leathery, triangular fronds that are deeply divided into smaller leaflets (pinnules). It's primarily an outdoor plant in warmer climates, often found in forests and rocky areas. It is widely cultivated commercially for use in floral arrangements due to its long-lasting foliage. While it can be grown indoors, it requires specific conditions to thrive and often struggles to adapt to typical indoor environments. Its popularity stems from its attractive foliage and durability as a cut flower.
Quick Plant Comparison
| Feature | Arrowwood | Leatherleaf Fern |
|---|---|---|
| Light | Full sun to partial shade | Bright, indirect light. Avoid direct sunlight, which can scorch the fronds. |
| Watering | Water deeply 1-2 times per week during the first growing season. Established plants need supplemental water only during extended dry periods. | Every 7-10 days, depending on environmental conditions |
| Humidity | 30-50% | 60-80% |
| Temperature | 10-27°C | 18-24°C |
| Care Level | Expert | Expert |
| Growth Rate | Moderate | Moderate |
| Max Height | 5-10 feet (outdoor) | 30-60 cm indoors (can be larger outdoors) |
| Pet Safety | ❌ Toxic To Pets | ✅ Safe |
| Soil | Well-drained soil; adaptable to various soil types including clay, loam, and sand. | Well-draining, slightly acidic potting mix rich in organic matter. A mix of peat moss, perlite, and potting soil works well. |
| Beginner Friendly | ❌ No | ❌ No |
| Weekly Maintenance | 30 minutes per month (outdoor) | 15 minutes weekly |
🔬 Botanical Information — Comparing These Plants
Arrowwood
| Scientific Name | Viburnum dentatum |
|---|---|
| Family | Adoxaceae |
| Native To | Eastern North America |
| Also Known As | Arrowwood Viburnum, Southern Arrowwood, Arrowwood |
| Leaves | Oppositely arranged, ovate leaves with coarsely toothed margins. The leaves are typically 2-4 inches long and turn shades of red and purple in the fall. |
| Flowers | Produces clusters of creamy white flowers in late spring to early summer. Flowers are small and numerous, creating a showy display. |
Leatherleaf Fern
| Scientific Name | Rumohra adiantiformis |
|---|---|
| Family | Dryopteridaceae |
| Native To | Southern Hemisphere: South Africa, Australia, New Zealand, South America |
| Also Known As | Leatherleaf Fern, Leather Fern, Iron Fern |
| Leaves | The leaves (fronds) are triangular in shape and deeply divided into numerous small, leathery leaflets (pinnules). The pinnules are a rich green color and have a slightly glossy texture. The fronds can grow up to 60 cm long and are arranged alternately along the stem. |
| Flowers | Leatherleaf ferns do not flower in the traditional sense. They reproduce via spores, which are located on the underside of the fronds. Flowering is not a consideration for indoor cultivation. |
📏 Size & Growth — Plant Comparison
Arrowwood
Leatherleaf Fern
🌱 Propagation — Comparing Plant Growth
Arrowwood
Methods: Stem cuttings, Seed
Difficulty: Moderate
Tips: Take softwood cuttings in late spring or early summer. Hardwood cuttings can be taken in late fall or winter. Rooting hormone can improve success. Seeds require stratification.
Leatherleaf Fern
Methods: Spores, Rhizome division
Difficulty: Moderate
Tips: Rhizome division is the easier method. Divide the rhizome in spring, ensuring each section has several fronds and roots. Plant in a well-draining potting mix and keep consistently moist.
✨ Benefits & Features — Comparing Plant Value
Arrowwood
Arrowwood Viburnum is known for its attractive fall color and its ability to attract birds. Its adaptability to various soil types makes it a versatile choice for landscaping.
- ✓ Attracts birds and pollinators.
- ✓ Provides beautiful fall color.
- ✓ Deer resistant.
- ✓ Relatively low-maintenance once established.
- ✓ Provides habitat for wildlife.
- ⚠️ Toxic to pets
Leatherleaf Fern
The leatherleaf fern is known for its durable, leathery fronds that are commonly used in floral arrangements. Its ability to withstand handling and maintain its appearance makes it a popular choice in the floral industry. It's also relatively drought-tolerant once established outdoors, which is unusual for a fern.
- ✓ Adds a lush, green aesthetic to indoor spaces.
- ✓ Provides a calming and natural element to decor.
- ✓ Non-toxic to pets, making it a safe choice for animal lovers.
- ✓ Can be used in floral arrangements.
- ✓ Offers a unique texture and visual interest.
- 🐾 Pet Safe
📅 Maintenance Schedule — Plant Care Comparison
Arrowwood
Leatherleaf Fern
🌞 Light Requirements
Arrowwood
Full sun to partial shade
Low light tolerant: ❌ No
Leatherleaf Fern
Bright, indirect light. Avoid direct sunlight, which can scorch the fronds.
Low light tolerant: ❌ No
💧 Watering Needs
Arrowwood
Water deeply when planting and during dry periods. Once established, it is relatively drought-tolerant. Avoid overwatering, which can lead to root rot. Check soil moisture before watering.
Leatherleaf Fern
Water thoroughly when the top inch of soil feels dry. Ensure good drainage to prevent root rot. Overwatering can lead to yellowing fronds and root rot, while underwatering causes the fronds to become dry and brittle.
🌡️ Temperature & Humidity
Arrowwood
Temperature: 10-27°C
Humidity: 30-50%
Leatherleaf Fern
Temperature: 18-24°C
Humidity: 60-80%
🤔 Which Plant Is Right For You?
Arrowwood
Viburnum dentatumGardeners looking for a low-maintenance shrub with attractive foliage, flowers, and berries for outdoor landscaping.
✅ Choose This Plant If...
- You want a low-maintenance shrub for your garden.
- You need a plant that attracts birds.
- You want a shrub with beautiful fall color.
- You are looking for a deer-resistant plant.
- You need a plant for a naturalized area.
❌ Skip This Plant If...
- You are looking for an indoor plant.
- You have limited outdoor space.
- You have pets that might ingest the plant.
Leatherleaf Fern
Rumohra adiantiformisExperienced plant enthusiasts who can provide the specific environmental conditions required for this fern to thrive indoors.
✅ Choose This Plant If...
- You appreciate the unique texture and appearance of fern foliage.
- You are looking for a long-lasting green for floral arrangements.
- You have a greenhouse or terrarium where you can provide high humidity.
- You enjoy a challenge and are willing to provide specific care.
- You want a plant that is non-toxic to pets.
❌ Skip This Plant If...
- You struggle to maintain high humidity levels in your home.
- You tend to overwater plants.
- You don't have a bright, indirectly lit space.
- You are a beginner plant owner.
🎯 Quick Verdict
⚡ Key Differences Between These Plants
Both plants have similar basic care requirements but differ in appearance and specific needs. Compare plants carefully to find the best fit for your space.
💡 Pro Tips For Comparing These Plants
Arrowwood Care Tips
Arrowwood Viburnum is an outdoor shrub that is not suitable for indoor growing. It requires full sun to partial shade and well-drained soil. It is relatively low-maintenance once established but requires proper outdoor conditions to thrive. Attempting to grow it indoors will likely result in failure due to insufficient light and humidity.
- Plant in well-drained soil to prevent root rot.
- Water deeply during the first growing season to establish a strong root system.
- Prune in late winter or early spring to remove dead or damaged branches.
- Monitor for pests and diseases and treat promptly.
- Apply a balanced fertilizer in early spring.
Leatherleaf Fern Care Tips
Leatherleaf fern is challenging to grow indoors due to its high humidity and specific light requirements. It needs consistent moisture, good air circulation, and protection from direct sunlight. Maintaining adequate humidity is crucial for its survival indoors. It is primarily an outdoor plant and requires expert care to thrive as a houseplant.
- Maintain high humidity by using a humidifier or placing the plant on a pebble tray.
- Water thoroughly but allow the soil to dry slightly between waterings.
- Provide bright, indirect light and avoid direct sunlight.
- Fertilize regularly during the growing season with a balanced liquid fertilizer.
- Monitor for pests and treat promptly with insecticidal soap or neem oil.
⚠️ Common Problems & Solutions — Plant Care Comparison
Arrowwood
Leatherleaf Fern
❓ Frequently Asked Questions — Comparing These Plants
Arrowwood
What are the light requirements for Arrowwood?
Arrowwood requires bright, indirect light to thrive indoors. Direct sunlight can scorch its leaves, so avoid placing it in south-facing windows without some form of shading. An east- or west-facing window that provides filtered sunlight is ideal. If natural light is limited, supplement with a grow light to ensure adequate illumination. Rotate the plant regularly to promote even growth on all sides. Insufficient light can lead to leggy growth and reduced leaf production. Monitor the plant’s leaves for signs of light stress, such as pale or yellowing leaves, and adjust its position accordingly.
How do I care for Arrowwood?
Arrowwood thrives with bright, indirect light. Water thoroughly when the top inch of soil feels dry, ensuring good drainage to prevent root rot. Maintain moderate humidity levels, especially during dry seasons, by misting regularly or using a humidifier. Fertilize monthly during the growing season (spring and summer) with a balanced liquid fertilizer diluted to half strength. Prune lightly to maintain shape and remove any dead or yellowing leaves. Repot every 1-2 years in spring, using a well-draining potting mix. Keep the plant away from drafts and sudden temperature changes. Monitor for pests such as spider mites or aphids and treat promptly with insecticidal soap. Provide stable conditions for best growth.
How do I propagate Arrowwood?
Arrowwood can be propagated through stem cuttings or air layering.
Leatherleaf Fern
What are the light requirements for Leatherleaf Fern?
Leatherleaf Ferns require bright, indirect light to thrive. Direct sunlight can scorch their delicate fronds, so avoid placing them in south-facing windows without any shade. An east- or north-facing window is ideal, providing gentle, diffused light. If you don’t have access to natural light, you can supplement with fluorescent grow lights. Position the lights about 12-18 inches above the plant. If the fronds start to turn pale or yellow, it may indicate that the plant is receiving too much light. Conversely, if the growth is slow and the fronds appear dark green, it may not be getting enough light. Rotate the plant regularly to ensure even exposure to light.
How do I care for Leatherleaf Fern?
Leatherleaf Ferns thrive in bright, indirect light. Avoid direct sunlight, which can scorch their delicate fronds. Water regularly, keeping the soil consistently moist but not soggy. Allow the top inch of soil to dry out slightly between waterings. Maintain high humidity levels by misting the plant regularly or placing it on a pebble tray. The ideal temperature range is between 60-75°F (15-24°C). Fertilize monthly during the growing season (spring and summer) with a balanced liquid fertilizer diluted to half strength. Repot every 1-2 years, or when the plant becomes root-bound, using a well-draining potting mix. Prune away any dead or yellowing fronds to encourage new growth. Proper air circulation is also crucial to prevent fungal diseases.
How do I propagate Leatherleaf Fern?
Leatherleaf Ferns can be propagated through division or spores. For division, carefully separate the rhizomes of a mature plant during repotting, ensuring each division has healthy roots and fronds. Plant each division in its own pot with well-draining potting mix. To propagate from spores, collect spores from the underside of mature fronds. Sow the spores on a moist surface of peat moss in a covered container. Maintain high humidity and warmth until small plantlets develop. Transplant the plantlets into individual pots once they are large enough to handle. Propagation from spores is a slow process, but it can be a rewarding experience.
Last updated: April 27, 2026 — Plant care data reviewed and verified by our editorial team.